![](/images/new-backgrounds/1127108/127108171x1.webp)
Functions of the unit in case of power failure
Power failure compensation circuit
The unit is equipped with an internalized power failure compensation circuit. When the unit has been charged for 48 hours (full), the date, time, timer record settings, and menu settings are kept up to 1 month without power. The accuracy of the time declines if the power plug is not connected to the wall outlet for and extensive period. In this case, it is recommended to check the present time setting.
Power failure reset recording
If there is a power failure during recording, the recording resumes after the power is restored. If there is a power failure during timer recording, the recording resumes after the power is restored when the present time is within the set time period of the timer. For alarm recording, recording will stop even the present time is within the set recording time.
When the power failure occurs during recording, the
recorded data may be damaged or playback of data may become impossible.
When the power failure occurs during recording, the
picture and audio of up to 6 MB just before the power failure are not recorded. When the
When the power failure occurs during alarm or emergency
recording, alarm or emergency recording is cancelled after the power is restored.
“REC ON” is registered in the system log list when the
recording is started, but it is not registered when the recording is resumed after a power failure.
The playback picture at the start position where recording
is resumed after a power failure may be disturbed and the search function may not operate properly for that position.
Log function when power failure occurs while the unit is in operation or the MAIN switch on the rear of the unit is turned OFF
In the event of power failure or if the MAIN switch on the rear of the unit is turned OFF when the power is supplied, up to 1000 items (including the time of failure and warning log displays as well as other items) are saved in the <System Log List>. ( page 73)
RESET button
When you press the RESET button on the rear panel with a ballpoint pen, etc., the microcomputer of this unit is reset and the power turns off.
The menu settings, the present time and picture data are kept even when the unit is reset.
Operations
83