Mitsubishi Electronics FR-E5NC 2.4 System Configuration Example

INSTALLATION

2.4 System Configuration Example

(1) PLC side

Load the "AJ61BT11", "A1SJ61BT11", "AJ61QBT11" or "A1SJ61QBT11" "Control & Communication Link system master/local module" on the main or extension base unit having the PLC CPU used as the master station.

(2)Inverter side

Mount the "CC-Link unit (FR-E5NC)" on the inverter.

(3)Connect the PLC CC-Link unit master station and the FR-E5NC with the CC-Link dedicated cable.

If the cable used is other than the CC-Link dedicated cable, the performance of the CC-Link system is not guaranteed. For the specifications and availability of the CC-Link dedicated cable, refer to the CC-Link catalog L (NA) -74108143E.

				Master station
	Masters for CC-Link master station
AJ61BT11/A1SJ61BT11 Control &		supplyPower	module	CPU	AJ61
Communication Link system master/					BT11
local module user's manual
... IB-66721
AJ61QBT11/A1SJ61QBT11 Control &
Communication Link system master/		Termination
local module user's manual
		resistor
... IB-66722
						Power
	CC-Link dedicated cable					supply

Inverter

Up to 42 units may be connected when only inverters are connected

Power

Motorsupply

Inverter

Termination resistor

Motor

7