Mitsubishi Electronics FR-E5NC 6.6Parameter Reading Program Example

PROGRAMMING EXAMPLES

6.6Parameter Reading Program Example

1)The following program reads Pr. 7 "the acceleration time" of station 2 inverter to D1. Pr. 7 "Acceleration time" reading code number: 07H (hexadecimal)

For the parameter code numbers, refer to the inverter manual.

The reply code at the time of instruction code execution is set to D2. (Refer to page 32.)

	M9036				H	H	K4	K
26				FROM 0000		00E2	M200	2
	X0000 X000F X0001 X0020
36							PLS	M302
		M302	Read setting
43							SET	M303
		M303					H
						MOV
45							0007	D100
					H	H		K
				TO	0000	01E6	D100	1
		M215					SET	M115
					H	H
								K
61				FROM 0000		02E7	D1	1
					H	H		K
				FROM 0000		02E6	D2	1
							RST	M115
							RST	M303
	M9036				H	H
							K4	K
82				TO	0000	0162	M100	2

Reads the remote input (RX20 to RX3F) data of buffer memory to M200-M231.

Writes Pr. 7 reading code (07H) to RWw6.

Switches on the instruction code execution request (RY2F).

M215: "Reads acceleration time (RWr7) and reply code (RWr6) to D1 and D2" when the instruction code execution completion (RX2F) switches on.

Switches off the instruction code execution request (RY2F).

Writes M100-M131 data to the remote outputs (RY20 to RY2F) of buffer memory.

Note: For parameters having numbers 100 and later, change their link parameter extension settings (set them to other than 0000H).

38