6 EXAMPLE OF CONNECTION
Connecting to various equipment with parallel data interface such as medical equipment and personal computer.
Connection 1
Turn off the power switches of the digital monochrome printer
2and the equipment to be connected.
Connect the digital monochrome printer with PC or medical
3equipment through a parallel cable.
When inserting the parallel cable to the printer's connector, make sure to fasten the springs at the both sides of the connector to secure the cable.
Personal computer or medical equipment
1 2 3 4
ON
OFF
To PARALLEL DATA IN connector
PARALLEL DATA IN
AC LINE
Connect Power cord
Rear panel
Mode switch setting
Set the mode switches on the rear panel.
•When setting the switch No. 1 to ON, FUNC, DOWN, UP, SET and GAMMA buttons will be locked. (The functions will not be available.) Set the switches other than No. 1 to OFF.
| 1 | 2 | 3 | 4 |
| LOCK |
|
|
|
| ON |
|
|
|
ON | OFF |
|
|
|
|
|
|
| |
OFF | 1 2 3 4OFF | |||
|
|
|
|
Installing printer driver
Printer driver is required to print the data from a personal computer connected with this printer.
The printer driver for Windows® is supplied with this printer.
Product name | Operating conditions |
For Windows® | Applies for Microsoft® WindowsNT® 4.0 |
|
|
Refer to the operation manual of the printer driver or "Read me" for installing.
WindowsNT® is the registered trademarks of Microsoft Corporation in the U.S.A and other countries.
10