Manuals / Mitsubishi Electronics / Computer Equipment / Printer

Mitsubishi Electronics P91DW Cause/Error display, Symptom/Remedy, 4Door error, 5Gear lock error

Models: P91DW

1 28

Page 20

Cause/Error display			Symptom/Remedy
4Door error			[Symptom]
			• When the door opens, an alarm tone is given.

[Remedy] Close the door.

Cause/Error display			Symptom/Remedy
5Gear lock error			[Symptom]
			• When the thermal head does not automatically go up after
			printing, an alarm tone is given.
			• " " is displayed in the indicator and all the functions of buttons

			and switches become invalid.

			[Remedy]
			[Remedy]
			Turn the power off. Then turn it on again.

Page 20

Image 20

Mitsubishi Electronics P91DW Cause/Error display, Symptom/Remedy, When the door opens, an alarm tone is given, 4Door error

Contents

DIGITALMONOCHROMEPRINTER DIGITAL MONOCHROME PRINTEROPERATION MANUAL Information RISK OF ELECTRIC SHOCK DO NOT OPEN 1 CONTENTS CONTENTSSPECIFICATIONS UNPACKINGPROTECTIVE MEASURES 2 PRECAUTIONSINSTALLATION LOCATIONS FOR LONG OPERATING LIFE THERMAL PAPERWHEN A DEFECT IS FOUND UNPLUG THE POWER CORD DURING A LONG ABSENCETECHNICAL DESCRIPTION SAFETY TECHNICAL CHECKSRESPONSIBILITY OF THE MANUFACTURER Accessories 13 UNPACKINGOpen the top of the box 2 Remove the cushion above the unitFront Panel FEATURES AND FUNCTIONSName FunctionRear Panel POTENTIAL EQUALIZATION TERMINALName Function5 INSTALLATION OF PAPER 1surface Open the doorLoad the paper roll 3 Pull out the paper endAdjust the paper position correctly Do not use defective paperDo not slack the roll paper INCORRECTCORRECTMode switch setting Installing printer driver6 EXAMPLE OF CONNECTION ConnectionPrinting procedure 7 PRINTINGCopy printing 1Turn on the powerPrecautions on Printing Paper saving modePaper feeding front panel, you can feed the paper8 ADJUSTMENT OF PRINT PICTURE Selection of Gamma γ Curve19 SETTING OF FUNCTION MODE Standby Paper type selection mode Paper saving modeSet condition printing mode Buzzer set mode FUNC DOWN UP SET GAMMA FEEDIndicator/Adjustable Adjustment contentsMode to select paper type Mode to select whether the buzzer will sound or not10 ERROR DISPLAY Symptom/RemedySymptom/Remedy Cause/Error displayCause/Error display Symptom/RemedySymptom When the door opens, an alarm tone is givenSTATUS AND MODES Contents of rightSet state/Mode LED display12 USE OF CLEANING PAPER Turn on the power3 Insert the cleaning paper Take out the cleaning paper13 PARALLEL DATA INTERFACE PARALLEL TERMINAL SIGNALParallel input connector port Signal allocation Signal Nibble DataAvailParallel input connector port Signal allocation Signal ECP AckReverse14 MAINTENANCE Turn off the power for maintenance Maintenance of Main UnitMaintenance of Rubber Roller Cleaning of Thermal Head15 SPECIFICATIONS SERVICE INFORMATIONPower supply and power consumptionMitsubishi Electric Europe B.V UK Branch German BranchFrench Branch Italian Branch

4Door error

[Symptom]

• When the door opens, an alarm tone is given.

Cause/Error display

5Gear lock error