Mitsubishi Electronics P91DW Error Display, Symptom/Remedy, Cause/Error display, Button input

10 ERROR DISPLAY

When an error in operation occurs, an audible alarm and a visible error is displayed in the LED indicator.

Cause/Error display	Symptom/Remedy
1No paper	[Symptom]
	• When the paper runs out or the paper is not installed, printing
	becomes impossible and alarm tone is given.
	In this case, all the functions of buttons and switches become
	invalid.
	[Remedy]
	Install brand-new paper according to "5. INSTALLATION OF
	PAPER" on page 8.
Cause/Error display	Symptom/Remedy
2Overheat	[Symptom]
	• When the head gets overheated, " " is displayed on the
	indicator and alarm tone is given.
	In this case, all the functions of buttons and switches
	become invalid.
	[Remedy]
3	Wait until the head is cooled down.

Cause/Error display		Symptom/Remedy
	Button input	[Symptom]
	error	• An alarm tone is given once, " " is displayed for one second
		in the indicator, and button operation is nullified in the following
		cases:
		• The COPY button is pressed first after the power is turned
		on.

•The DOWN, UP, SET or GAMMA button is pressed when the MODE switch No. 1 is set to ON.

•Any button on the front panel is pressed when one of the other error messages is displayed on the LED.

16