Manuals / Mitsubishi Electronics / Computer Equipment / Printer

Mitsubishi Electronics P91DW Indicator/Adjustable, Adjustment contents, Paper type, selection

Models: P91DW

1 28

Download 28 pages 29 Kb

Page 18

Image 18

2Adjust a numeric value by pressing }or {button. Adjustable items of each function mode are as follows.

FUNC DOWN UP SET

GAMMA FEED

	Indicator/Adjustable	Adjustment contents
	item	Adjustment contents
	item
	Paper type	Mode to select paper type.
	selection	: Standard paper
	mode	: High density paper

	Paper saving Mode to select paper saving mode.
	mode			: Paper saving mode OFF
				: Paper saving mode ON
				: Paper saving mode ON

	Printer condi- Mode to select whether the printer conditions will be printed
	tion printing				over the image or not.
	mode				: The printer conditions are not printed.
	mode				: The printer conditions are not printed.
					: The printer conditions are printed.

Buzzer set	Mode to select whether the buzzer will sound or not.
mode	: Buzzer does not sound. (Sounds only at occurrence of
	error)

3 : Buzzer sounds.

When completing setting the function, press the SET button.

The set functions will not be lost even if the power is turned off.

Page 18

Image 18

Contents

DIGITAL MONOCHROME PRINTER OPERATION MANUALDIGITALMONOCHROMEPRINTER Information RISK OF ELECTRIC SHOCK DO NOT OPEN SPECIFICATIONS 1 CONTENTSCONTENTS UNPACKING2 PRECAUTIONS INSTALLATION LOCATIONSPROTECTIVE MEASURES WHEN A DEFECT IS FOUND FOR LONG OPERATING LIFETHERMAL PAPER UNPLUG THE POWER CORD DURING A LONG ABSENCESAFETY TECHNICAL CHECKS RESPONSIBILITY OF THE MANUFACTURERTECHNICAL DESCRIPTION Open the top of the box Accessories13 UNPACKING 2 Remove the cushion above the unitName Front PanelFEATURES AND FUNCTIONS FunctionName Rear PanelPOTENTIAL EQUALIZATION TERMINAL FunctionLoad the paper roll 5 INSTALLATION OF PAPER1surface Open the door 3 Pull out the paper endDo not slack the roll paper Adjust the paper position correctlyDo not use defective paper INCORRECTCORRECT6 EXAMPLE OF CONNECTION Mode switch settingInstalling printer driver ConnectionCopy printing Printing procedure7 PRINTING 1Turn on the powerPaper saving mode Precautions on PrintingPaper feeding front panel, you can feed the paper8 ADJUSTMENT OF PRINT PICTURE Selection of Gamma γ CurveSet condition printing mode Buzzer set mode 19 SETTING OF FUNCTION MODEStandby Paper type selection mode Paper saving mode FUNC DOWN UP SET GAMMA FEEDerror Indicator/AdjustableAdjustment contents Paper typeSymptom/Remedy 10 ERROR DISPLAYSymptom/Remedy Cause/Error displaySymptom Cause/Error displaySymptom/Remedy When the door opens, an alarm tone is givenSet state/Mode STATUS AND MODESContents of right LED display3 Insert the cleaning paper 12 USE OF CLEANING PAPERTurn on the power Take out the cleaning paper13 PARALLEL DATA INTERFACE PARALLEL TERMINAL SIGNALParallel input connector port Signal allocation Signal Nibble DataAvailParallel input connector port Signal allocation Signal ECP AckReverseMaintenance of Rubber Roller 14 MAINTENANCETurn off the power for maintenance Maintenance of Main Unit Cleaning of Thermal HeadPower supply and 15 SPECIFICATIONSSERVICE INFORMATION power consumptionFrench Branch Mitsubishi Electric Europe B.V UK BranchGerman Branch Italian Branch

Indicator/Adjustable

Adjustment contents

Paper type

Mode to select paper type.

selection

: Standard paper

mode

: High density paper

tion printing

Buzzer set

Mode to select whether the buzzer will sound or not.

error)