ON-TIMER operation procedure
■If the room temperature is at near optimum temperature at the set time, the operation starts 5 to 60 minutes before the set time. 
Page 13
Example: In the case you wish to bring the temperature to nearly set temperature in at AM 8:00.
HI POWER | ECONO | |
AUTO | AM | |
HI | ||
| ||
MED |
| |
LO |
| |
ON | ||
FAN SPEED ON | OFF MODE | |
HI POWER TEMP ECONO
AIR FLOW
TIME CANCEL
ON OFF RESERVE
TIMER
TIMEACL
1 | Press the ON TIMER button. | |
| ON TIMER indicator | ON is blinking. |
2 | Press the “ or | ” button. |
Each time the 
button is pressed, the indicator is switched in the order of:
AM | AM | AM | ... AM | AM | ... |
0:00 | 0:10 | 0:20 | 1:00 | 1:10 |
|
Each time the 
button is pressed, the indicator is switched in the order of:
AM | PM | PM | ... | PM | PM | ... |
0:00 | 11:50 | 11:40 |
| 11:00 | 10:50 |
|
Set at AM 8:00.
3 Press the RESERVE button.
The indication changes from blinking to steady lighting and the setting is complete. The timer light (yellow) is on.
⇓
•Operation starts 5 to 60 minutes before the set time.
•The TIMER light goes out at the set time.
Changing of set time
Set a new time by using the ON TIMER button.
Releasing procedure
Press the CANCEL button to turn off the timer indicator.
Program TIMER operation procedure
■The timer operations that consist of the combination of the timer being set at both on and off. Once this has been set and operations started, operations will commence and end at the same time every day as long as the ON/OFF button is not pressed.
Example: When it is desired to stop at 10:30 PM, and then start operation at 8:00 AM, near the set temperature.
HI POWER | ECONO |
AUTO | PM |
HI |
|
MED |
|
LO |
|
ON | OFF |
FAN SPEED ON | OFF MODE |
HI POWER TEMP ECONO
AIR FLOW
TIME CANCEL
ON OFF RESERVE
TIMER
TIMEACL
Changing of set time
Set a new time by using the OFF TIMER or ON TIMER button.
1 Press the ON/OFF button.
■OFF TIMER operation setting
Set by the procedures on page 11.
PM
Set to 
.
OFF
■ON TIMER operation setting
Set by the above mentioned ON TIMER operation procedures.
| AM |
Set to | . |
| ON |
The setting of the lighting of the timer lamp (yellow) of this unit is complete.
The time will be displayed on the remote control unit. The display will change depending on the operational status.
ON | OFF | ON | OFF |
(Stopped)(Operating)
Releasing procedure
Press the CANCEL button to turn off the timer indicator.
– 12 –
