Operations

F - 160 CE Operation and Maintenance Manual

 

 

5.5 Manual nip adjustment

a)Turn the MAIN POWER to the “ I ” position.

If the substrate does not fall with in the preset GAP settings available, a manual nip setting must be performed.

P o w e r

O N / O F F

If you are unsure of a substrate thickness, it is recommended that you use the manual nip setting procedure.

If you are performing a mounting application from the rear of the machine, the pull rollers must be set manually. Refer to Section 5.5.2 Pull roller nip adjustment

procedure.

5.5.1Main roller manual nip adjustment

I N F O R M A T I O N

The laminator will only turn on if all

E - STOPS are unlatched and

the E-CABLE is reset.

b)Press RESET. The front control panel will illuminated.

Machine reset

W A R N I N G

Caution should always be exercised

when using the laminator with the safety shields raised.

You can be seriously HURT or INJURED!

Page 5 - 18

© GBC Films Group April 2000

Page 75
Image 75
GBC F - 160 CE Manual nip adjustment, Main roller manual nip adjustment, Procedure