F - 160 CE Operation and Maintenance Manual

Operations

 

 

( 11 ) GAP : When pressed, will decrease the gap by 1/16 in. increments. If held down, it will automatically decrease the gap by 1/16 in. increments until it has reached a minimum opening of 0 in. on the GAP DISPLAY.

( 13 ) PRESSURE : When pressed once, will decrease the pressure by 5%. If held down, it will decrease from 100% of the maximum allowed pressure to 0% at which point no bars will be illuminated.

G A PP R E S S U R E

1/16

11

13

G A PP R E S S U R E

1

( 12 ) PRESSURE DISPLAY : Displays the amount of pressure being used. Each bar represents 10% of the maximum allowable pressure. All ten bars illuminated equals 100% of the maximum allowable pressure.

W A R N I N G

Keep hands and fingers clear of the laminator roller nip when adjusting PRESSURE .

You can be CRUSHED or BURNED!

G A PP R E S S U R E

1/16

12

I N F O R M A T I O N

When adjusting the pressure, the gap will be affected as well.

( 14 ) PRESSURE : When pressed once, will increase the pressure by 5%. If held down, it will increase from 0% of the minimum allowed pressure to 100% at which point all bars will be illuminated.

G A PP R E S S U R E

0

14

© GBC Films Group April 2000

Page 5 - 3

Page 60
Image 60
GBC F - 160 CE manual R N I N G