GBC F - 160 CE manual Emergency stop, Stops

Safety		F - 160CE Operation and Maintenance Manual
1.4	Emergency stop	To engage an E-STOP, press down on any of the
		four. Any E-STOP, when engaged, removes power to
		the laminator. Refer to Figure 1.4.2 Engage an E-STOP.

The laminator is equipped with four emergency	Figure 1.4.2 Engage an E-STOP
stops ( E-STOP) located at the front of the cabinets and
the rear of the cabinets. Refer to Figure 1.4.1 Emergency
stops.

P u s h

Figure 1.4.1 Emergency stops

Emergency stops

Rear

I N F O R M A T I O N

Front

The machine will only operate if all four

E - STOPS are in the unlatched position .

To continue operation, all E-STOPs must be in the unlatched position. To reset, twist the E-STOP1/4 turn clockwise. Refer to Figure 1.4.3 Reset the E-

STOP.

Figure 1.4.3 Reset the E-STOP

Unlatch

Emergency stops

Page 1 - 4 © GBC Films Group April 2000