F - 160 CE Operation and Maintenance Manual | Operations |
|
|
I N F O R M A T I O N
Excessive pressure will cause the substrate to bow or flatten.
I N F O R M A T I O N
Refer to Figure 5.5.2 for proper roller
pressure.
Figure 5.5.2 Pull roller pressure
Leader board
Proper
pressure
Leader board
Excessive
pressure
I N F O R M A T I O N
Density of the substrate will determine the amount of pressure you may use.
W A R N I N G
When operating the laminator using the variable speed footswitch, keep hands and fingers away from the nip of the rollers. You may be CRUSHED or BURNED!
j)Step on the variable speed footswitch to back the leader board out.
CAUTION
Speed is controlled through the variable speed footswitch when the safety shield is in the raised position.
k)The pull roller nip has now been manually set.
© GBC Films Group April 2000 | Page 5 - 23 |