Installation | F - 160 CE Operation and Maintenance Manual |
|
|
p)Press STOP. The bottom rollers stop turning.
15.0 | G O | |
F W D | ||
| ||
S P E E D | S T P R E V | |
| ||
S AF ETY |
|
q)Press SPEED ▼ once. SPEED DISPLAY decreases in increments of .5 per press down to 00.0.
00.0 | G O | |
F W D | ||
| ||
S P E E D | S T O P R E V | |
| ||
S AF ET |
|
r)The TOP TEMP DISPLAY and BOT TEMP DISPLAY are solid indicating the actual temperature is within a +/- 6 oF of the set point temperature.
TOP TEMP | BOT TEMP |
120 | 120 |
W A R N I N G
Caution should always be exercised
when using the laminator with the safety shields raised.
You can be seriously HURT or INJURED!
s)Raise the front safety shield, remove the front feed table.
t)Touch the upper and lower main rollers. They should feel warm to the touch.
u)Replace the front feed table and lower the front safety shield.
I N F O R M A T I O N
The SAFETY indicator should not be flashing when the tables are properly seated and the safety shields are in the closed position..
Page 4 - 26 | © GBC Films Group April 2000 |
