GBC F - 160 CE manual Accessory Pack contents

Installation F - 160 CE Operation and Maintenance Manual

b)Remove any plastic strapping and/or packing paper taped to the rollers.

CAUTION

Do not use a knife or other sharp object to remove the shrink wrap from around the laminator. You can cause irreparable damage to the rollers.

c)Remove all packing materials to a safe distance from the laminator and dispose of properly.

d)Use two people to carefully roll the laminator to the desired location.

I N F O R M A T I O N

About recycling: The crate components can be reused for shipping the laminator again or can be disassembled and the wood and screws recycled. The shrink wrap is not recyclable, so it must be discarded.

4.6 Accessory pack

Once the Falcon 160 CE Laminator has been unpacked and moved into final position, open the accessory pack and verify the contents.

Accessory Pack contents

•One T-handle allen wrench ( 475-200 )

•One Zippy knife ( 475-620 )

•One Terry clothe towel ( 475-950 )

•One Operators manual ( 930-045 rev. A )

•One roll masking tape ( 475-000 )

•Two Polyurethane O-rings ( 480-005 )

•One strain relief for main power ( 175-201 )

•One rubber cement pad ( 930320 )

•One crankhandle ( 629-018 )

•One fuse, 0.5A ( 186-022 )

•Two fuses, 2.5A ( 186-220 )

•Four leveling bolts ( 645-011 )

•Twelve 3/4 - 10 nuts ( No P/N )

If you are missing any of the itemslisted above, contact your local service technician or sales representative.

Contacts:

GBC Parts ( 800 ) 790 - 7787

GBC Europe parts 33 - 45 - 535 - 7676

Page 4 - 8 © GBC Films Group April 2000