
F - 160 CE Operation and Maintenance Manual | Maintenance |
|
|
c)Press SEL.
|
|
|
|
|
|
|
|
|
| S | L |
| S A V |
J O B | 0 |
|
|
|
|
|
|
|
|
|
| ||
|
| S T A N D B Y |
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
= Flashing
W A R N I N G
Caution should always be exercised
when using the laminator with the safety shields raised.
You can be seriously HURT or INJURED!
d)Open the front and rear safety shields.
e)Remove the front feed table.
Removing adhesive build up
a)For pressure sensitive adhesives: put on the rubber gloves and use isopropyl alcohol and a terry cloth towel.
b)For thermal adhesives: while the laminator is at normal operating temperature, put on the rubber gloves and use the rubber cement eraser. This allows the eraser to bead up the adhesive.
CAUTION
Excessive pressure can destroy the silicone
layer by pressing to hard or scrubbing too long in one spot.
c)Wipe away the beads with isopropyl alcohol and a cotton terry cloth.
CAUTION
Do NOT pick or pull heat activated adhesive off the rolls when they are cold. You can cause irreparable damage to the laminating rolls.
© GBC Films Group April 2000 | Page 8 - 3 |