Installation | F - 160 CE Operation and Maintenance Manual |
|
|
4.5 Crated | To uncrate the laminator |
W A R N I N G
The Falcon 160 CE Laminator is a large and heavy piece of equipment. It is necessary to e m p l o y L I C E N S E D R I G G E R S O N L Y t o move the laminator. The laminator is not designed to be tipped up or sideways in any way. Such action disturbs the exact alignment of the rolling parts of the machine and requires extensive realignment. You can be crushed or seriously injured.
I N F O R M A T I O N
GBC Film Group's warranty does not cover malfunction of the equipment due to mishandling and / or tipping. GBC Films Group bears no responsibility for personal injury or damage due to moving the laminator improperly .
a)Remove the top of the crate and then the sides in the order shown in Figure 4.5.1
CAUTION
Do not allow the top to fall into the crate. It can damage the laminator .
I N F O R M A T I O N
Do not put packing screws on the floor.
They can cause problems when trying to roll
the laminator into position or you can become injured if stepped on.
Tools required
•# 2 Phillips head screwdriver
•7/8” open end wrench or adjustable wrench
•Crow bar
•A second person
CAUTION
A second person must support the side labeled 5 in Figure 4.5.1 It can fall and damage the laminator or cause harm to you and others.
Page 4 - 6 | © GBC Films Group April 2000 |
