Installation

F - 160 CE Operation and Maintenance Manual

 

 

e)Remove the front control side castor by turning the nut securing the castor in the leg.

Nut

Castor

f)Slide one of the leveling bolts where the castor was removed and along with a 3/4-10 nut inside the leg.

Nut

Bolt

g)Place two more 3/4-10 nuts on the leveling bolt under the leg. Refer to Figure 4.7.1 Leveling pad installed.

h)Attach the leveling pad to the bottom of the leveling bolt and secure with wrenches. Refer to

Figure 4.7.1 Leveling pad installed.

Figure 4.7.1 Leveling pad installed

Nut

Nut

Jam nut

Leveling pad

i)Tighten the jam nut against the leveling pad. Refer to Figure 4.7.1 Leveling pad installed.

j)Perform steps e through “ i ” for the rear control side castor and leveling pad.

Drive side

a)Perform steps “ a ” through “ j ” from the Control side.

Page 4 - 10

© GBC Films Group April 2000

Page 37
Image 37
GBC F - 160 CE manual Drive side, Leveling pad installed