F - 160 CE Operation and Maintenance Manual | Installation |
|
|
4.8 Leveling
Leveling of the laminator is very important in the way the machine performs. Leveling is crucial to the tram ( tracking ) of the materials through the machine.
a)Position the level on the top of the control side frame. Not on the cabinet. Refer to Figure 4.8.1 Front to back control side
4.8.1Front to back control side
Level
I N F O R M A T I O N
The side frame provides a more accurate reading than the cabinet.
b)Level the control side from front to back by holding the nut inside the leg and turning the nut below the leg with the wrench.
I N F O R M A T I O N
A second person can read the level while you
make the appropriate adjustments.
-To raise; raise the nut inside the leg and turn the nut below the leg clockwise.
Raise
Turn clockwise
-To lower; turn the nut below the leg counter clockwise.
Lowering
limit
Turn counter clockwise
© GBC Films Group April 2000 | Page 4 - 11 |
