Installation | F - 160 CE Operation and Maintenance Manual |
|
|
I N F O R M A T I O N
Lowering is limited to the amount of height within the inside of the leg.
c)Position the level on the top of the drive side frame. Not on the cabinet. Refer to Figure 4.8.2 Front to back drive side
Figure 4.8.2 Front to back drive side
Level
I N F O R M A T I O N
A second person can read the level while you
make the appropriate adjustments.
-To raise; raise the nut inside the leg and turn the nut below the leg clockwise.
Raise
Turn clockwise
- To lower; turn the nut below the leg counter clockwise.
Lowering
limit
Turn counter clockwise
d)Level the control side from front to back by holding the nut inside the leg and turning the nut below the leg with the wrench.
e) Confirm that power is supplied to the laminator.
Page 4 - 12 | © GBC Films Group April 2000 |
