![](/images/new-backgrounds/1314710/314710241x1.webp)
Maintenance | F - 160 CE Operation and Maintenance Manual |
|
|
| Preparation of the laminator |
•Lubricate the grease fittings, chain, and gears.
( performed by service technician )
•Check wire termination tightness.
( performed by service technician )
ELECTRICAL
S H O C K
Remove power from the laminator before servicing. You can be severely shocked, electrocuted or cause a fire.
a)Turn the MAIN POWER to the “ I ” position.
P o w e r
O N / O F F
8.2 Cleaning the rollers
b) Press machine RESET.
Tools required
• Adhesive coated boards |
|
( picks up dust and particles off of the rolls ) |
|
• Protective rubber gloves |
|
( This will protect your hands from the isopropyl |
|
alcohol ) |
|
• 80% isopropyl alcohol |
|
( a mild dishwashing detergent and water may |
|
be used instead ) |
|
• Rubber cement eraser |
|
( a belt sander dressing block may be used |
|
instead ) | Machine reset |
• Several 100% cotton terry cloths | |
( best for lint free cleaning ) |
|
Page 8 - 2 | © GBC Films Group April 2000 |