GBC F - 160 CE manual Resume operation, Push

F - 160 CE Operation and Maintenance Manual Operations

5.2.2 Resume operation

a)Reset the E-STOPor the E-CABLE.

-Resetting the E-STOP

Unlatch

-Resetting the E-CABLE

Push in

b)Press machine RESET. All parameters have defaulted.

Machine reset

I N F O R M A T I O N

Once RESET has been engaged, power will be restored, Laminating rollers will reset to 1 in. GAP and the display will return to it's default settings.

Default mode; TOP TEMP . = 68 o F ( 20 o C ), BOT. TEMP. = 68 oF ( 20 oC ), GAP = 1 in., PRESSURE = no bars are solid, JOB = 0, no motion direction selected, SPEED = 00.0 and SLEEP = flashing

I N F O R M A T I O N

The laminator will only turn on if all

E - STOPS are unlatched and

the E-CABLE is reset.

c)Enter the desired operating parameters or select the job number prior to the emergency stop situation.

d)You may now resume operating the laminator.

© GBC Films Group April 2000 Page 5 - 11