![](/images/backgrounds/279804/bgf.png)
Page 1 - 6
Safety F - 160CE Operation and Maintenance Manual
© GBC Films Group April 2000
Press RESET located on the right leg at the front
of the machine. Refer to Figure 1.5.3 Machine reset.
Figure 1.5.3 Machine rest
Machine reset
1.6 Front feed tableThe front feed table must be in proper position
for the laminator to operate in auto run. Refer to Figure
1.6.1 Front feed table.
When the key is removed from the interlock, the
laminator will stop. With the table removed, the laminator
will operate using the variable speed footswitch.
Figure 1.6.1 Front feed table
To continue operation, press STOP.
SPEED
SAFETY
FWD
REV
5.0
GO
STOP
Then press GO.
SPEED
SAFETY
FWD
REV
5.0
GO
STOP