Operations | F - 160 CE Operation and Maintenance Manual |
|
|
W A R N I N G
Caution should always be exercised
when using the laminator with the safety shields raised.
You can be seriously HURT or INJURED!
I N F O R M A T I O N
Footswitch speed is not indicated in the SPEED DISPLAY on the control panel .
• Raise the safety shield.
I N F O R M A T I O N
When a safety shield is raised while pressing on the variable speed footswitch, the speed may be faster or slower than the indicated panel speed.
I N F O R M A T I O N
When the safety shield is raised, the laminator will only run while the variable speed footswitch is depressed.
•Adjust for desired speed using the variable speed footswitch.
To lower the safety shield
• Lower the safety shield.
I N F O R M A T I O N
When the safety shield is lowered, speed
reverts to the panel speed setting.
•Press and hold GO for 3
•Release the variable speed footswitch.
•Release GO. GO reverts to solid.
Page 5 - 8 | © GBC Films Group April 2000 |