Installation | F - 160 CE Operation and Maintenance Manual |
|
|
c)Press down on the variable speed footswitch. GO begins flashing and the bottom rollers are turning.
ATTUNG
WARNING
ADVERTENCIA
I N F O R M A T I O N
Footswitch speed is not indicated in the SPEED DISPLAY on the control panel .
W A R N I N G
Caution should always be exercised
when using the laminator with the safety shields raised.
You can be seriously HURT or INJURED!
a)Raise the rear safety shield.
b)Lift the clevis pin up from the saddle of the upper unwind shaft.
Saddle
Clevis pin
4.11.3Unwind shafts and unwind brakes
The unwind shafts swing out and the unwind brakes tension the turning of the shaft from no tension to complete stop tension.
Should you detect or experience complications with the unwind shaft movement or the unwind brake tension, call you local area service representative.
c)Swing the upper unwind shaft to its fully extended position. Swing back and reseat the shaft in the saddle. The swing movement should be smooth and easy.
d)Ensure that the upper unwind brake adjustment knob is backed off completly. The counter clockwise turn should be easy.
Page 4 - 28 | © GBC Films Group April 2000 |
