Maintenance | F - 160 CE Operation and Maintenance Manual |
|
|
I N F O R M A T I O N
When cleaning the bottom main roller, switch the motion direction to reverse. When cleaning the bottom pull roller, switch the motion direction to forward.
This will prevent anything from
being pulled into the nip.
W A R N I N G
When operating the laminator using the variable speed footswitch, keep hands and fingers away from the nip of the rollers. You may be CRUSHED or BURNED!
Cleaning the beads of
adhesives, dust and dirt from
the rolls
This can be done one of two different methods. Both are acceptable forms of cleaning the beads of adhesives, dust, and dirt from the rolls.
Method 1
a)Allow the laminator to cool slightly to no higher than 110oF ( 43oC ).
d)Since the safety shields are raised and the tables removed, you must use the footswitch to rotate the bottom rollers after cleaning a section.
CAUTION
Speed is controlled through the variable speed footswitch when the safety shield is in the raised position.
TOP TEMP | BOT TEMP |
<110 - | <110 - |
b)Set the motion direction to REV ▼.
|
|
|
|
|
|
| 00.0 |
| GO | FWD | |
|
|
| |||
|
|
|
|
| |
|
|
|
| STOP | REV |
|
| SPEED | |||
|
|
|
| ||
|
| SAFETY |
|
| |
|
|
|
|
|
|
Page 8 - 4 | © GBC Films Group April 2000 |
