GBC F - 160 CE Emergency cable, Refer to .5.2 Reset the E-CABLE, Machine will only operate if

F - 160 CE Operation and Maintenance Manual	Safety
Press RESET located on the right leg at the front	Figure 1.5.1 Emergency cable
of the machine. Refer to Figure 1.4.4 Machine reset.
	Front

Figure 1.4.4 Machine rest

Emergency cable

Rear

Machine reset Emergency cable

1.5 Emergency cable

To continue operation, press in on the cable reset located on the right leg of the front operating position.

Refer to Figure 1.5.2 Reset the E-CABLE.

In the event an E-STOPis not reachable, use

your foot to activate an emergency cable ( E-CABLE) Figure 1.5.2 Reset the E-CABLElocated at the base of the stand from the front or rear of

the machine. Refer to Figure 1.5.1 Emergency cable.

I N F O R M A T I O N
The machine will only operate if the	Push in
E-CABLE is in the unlatched position.

© GBC Films Group April 2000 Page 1 - 5