Mitsubishi Electronics WD-52631 manual Split Screen Operations Instructions, PAUSE. Press

40Chapter 3. TV Operation

Split Screen

Split Screen allows you to view pictures from two different sources at the same time. Split Screen is available when you have video sources connected to the TV in addition to a connection to ANT 1 or ANT 2.

Operation

Split Screen Operations	Instructions
Turn Split Screen on or off	Press SPLIT.
	Press		or	. The speaker icon appears briefly to indicate the
Switch the sound source between main	sound source as either the main picture (left) or sub-picture
and sub-pictures.	(right). The sound source is the side you can control with the
	remote control.
Check which picture is the sound source.	Press INFO. The speaker icon appears in the status display to indicate
	the sound source.
	1.	Press		to make the sub-picture the sound source.
	2. Press INPUT and move the highlight to the icon for the input you wish
Change the source of the sub-picture.		to view as the sub-picture (see figure 5).
	3. Press ENTER to make the change.
	Grayed-out input icons are unavailable as Split Screen sources or with
	the current source.
Change channels (when the input source is	Press		to make the sub-picture the sound source then press CH / .
ANT 1 or ANT 2).
Freeze or unfreeze the sub-picture.	Press		(PAUSE). Press		again to return to normal moving video.
Change the size of the main and sub-pic-	Repeatedly press FORMAT to cycle through picture sizes. See the follow-
tures.	ing page for sample displays.
Make the sub picture fill the screen.	1.	Press		to make the sub-picture the sound source.
	2.	Press SPLIT to close Split Screen mode.

“SPLIT” appears under the Video icon to distinguish this menu from the Input Selection menu.

Choice of Split Screen sub-Picture Sources

IMPORTANT

Split Screen is unavailable if:

•Your only inputs are ANT 1 and ANT 2.

•Either picture source is a 1080p signal from an HDMI jack.

•Either picture source is from a personal computer.

Figure 5. Change the source of the sub-picture with the Split Screen Input Selection menu.