Mitsubishi Electronics WD-60C8 Controlling A/V Receiver Sound Volume, With a Standard TV Setup

2. TV Setup 15

Controlling A/V Receiver Sound Volume

Use one of the methods below to control sound volume from an A/V receiver.

With a Standard TV Setup

•Recommended Method: Program the TV’s remote control for your A/V receiver and enable the Audio Lock feature. See page 68.

•Program the TV’s remote control for your A/V receiver and set the TV remote’s slide switch to the AUDIO position to control A/V receiver volume. Set the switch back to the TV position to control the TV.

•Use the remote control that came with the A/V receiver.

With NetCommand IR Control

736 or 835 Series TV. Set up NetCommand control of the A/V receiver’s volume functions in the Inputs > AVR menu. The TV’s remote will then control A/V receiver volume. See page 58.

With NetCommand for HDMI (CEC-Enabled

HDMI A/V Receiver)

The TV’s remote control may control some functions of the A/V receiver. See Appendix E, “NetCommand HDMI Control of CEC Devices,” page 77.