Monessen Hearth SBV400, SBV500 Electronic Pilot Ignition Wiring, Remote Wall Switch, 62D4036

BBV, SBV Series Natural Vent Gas Fireplaces ELECTRICAL INSTALLATION

ELECTRONIC PILOT IGNITION WIRING

WARNING

Do not connect 110-120V AC to the Re- mote Wall Switch. The appliance will malfunction or destroyed.

Figure 17 -	FP2027
Electronic Ignition System Wiring Diagram

REMOTE WALL SWITCH

Position the wall switch. Do not extend beyond the 15’ of wire.

OPTIONAL DC REMOTE SYSTEMS

These instructions replace the section entitled Hearth Mount in the Millivolt hand held remote in- structions supplied with the remote.

1.Plug in remote connector wire to remote receiver.

2.Connect the wire terminal from the remote receiver. This replaces the 15’ wall switch connection to the switch. Figure 17

3.Mount remote control receiver at junction box (for your wall switch).

18 62D4036