BM48271 Rev2 18/7/07 16:32 Page 10
Once you have selected programme 12 from the MENU:
a)Touch the HOMEMADE button once, KNEAD 1 will appear on the LCD display, then touch the TIME button to adjust the minutes, and then touch the HOMEMADE button to confirm the time for this step.
b)Touch the HOMEMADE button to enter the next step, RISE 1 will appear on LCD display, then touch the TIME button to adjust minutes, the number will increase quickly once you hold the TIME button. The time will only increase in minutes. To decrease the amount of minutes, touch the TIME button until you reach the MAX time, then touch the TIME button again to return to Ò0Ó. You can then touch the TIME button to increase to the required time. Touch the HOMEMADE button to confirm the time for this step.
c)Following the same method as for the KNEAD 1 and RISE 1, set the remaining steps. Upon finishing setting all; the steps, touch the
START/STOP button 
to exit the setting.
d)Touch Start/stop button again to activate the operation.
NOTE: The setting can be memorised and ready for the next time you use the breadmaker.
Start/stop 
For starting and stopping the selected baking programme.
To start a programme, touch the
START/STOP button 
once. A short beep will be heard and the two dots in the time display begin to flash and programme starts. Any other button is inactivated except the START/STOP, LIGHT and PAUSE buttons after a programme has switched off. This feature will help to prevent any unintentional disruption to the operation of programme.
To stop the programme, touch the START/STOP button for 2 seconds, a beep will sound to confirm.
Time 
Use the timer when you want the bread to be ready later or in the morning. A maximum of 13 hours can be set. Check if this function is available by looking at ÒBaking cycle timesÕ on page 30 for further instructions.
Pause
After the baking cycle starts, you can touch the PAUSE button to interrupt the process at any time. The operation will be paused but the setting will be memorised, the outstanding time will be flashed on the LCD. Touch the PAUSE button again and the programme will continue.
Memory
If the power supply has been interrupted during the course of making bread, the process of making bread will be continued automatically within 10 minutes, without touching the STOP/START
button 
. If the interruption time exceeds 10 minutes, the memory cannot be kept, you must discard the ingredients into the baking pan and add the ingredients into the baking pan again, and the breadmaker must be restarted. But if the dough has not entered the rising phase when the power supply breaks off, you canÕt touch the
START/STOP button 
directly to continue the programme from the beginning.
Keep warm
Bread can be automatically kept warm for 1 hour after baking. Hot air will be circulated to keep it warm. The function can be used on most settings (See ÔBaking cycle timesÕ section). During keeping warm, if you would like to take the bread out, switch the programme off by touching the START/STOP button 
.
10
