G-2

Term

Definition

ROM

Read Only Memory.

Scan List

The Scan List determines which channels the radio scans, when operating in

 

the Scan Mode, on the current channel.

Scan List Member

The Scan List allows you to select the grouping of channels that make up the

 

current Scan List Member channels. This grouping of Scan List Member channels

 

can then be scanned for transmission activity - one at a time, when the radio is in

 

Scan Mode. A Scan List can have a maximum of 16 Scan List

 

Members. Scan List Member scanning priority is definable.

Scan Mode

When the radio is in one of the two Scan States: Active Scan and Landed Scan.

 

This mode is initiated when the programmable SCAN button is pressed.

Serial Number

Each radio has its own unique serial number. This information is stored in the

 

radio‟s codeplug.

Software

Computer programs, procedures, rules, documentation, and data pertaining to

 

the operation of a system.

Squelch

Muting of audio circuits when received signal levels fall below a pre-determined

 

value.

Tone Private Line

Transmitted when the receiving radio is to only receive calls from radios with

(TPL)

specific TPL codes, this creates communications groups while operating in

 

Conventional Dispatch mode. TPL allows for more use and privacy on a fre-

 

quency. TPL is transmitted at a sub-audible (not able to be heard) frequency.

 

Also known as CTCSS.

Tx Frequency

A designated frequency used when transmitting carrier for the current channel.

µC

Microcontroller.

UHF

Ultra High Frequency.

VHF

Very High Frequency.

Page 60
Image 60
Motorola 6816101H01-A service manual Rom, Tpl, Uhf, Vhf