an access point module.
•Syncing – module is attempting to synchronize timing to a single access point module
•Registering – module sent a request for registration and is awaiting a response
•Registered – module is locked on to a specific access point module and ready to transmit and receive data packets
•Alignment – module is in alignment mode
RSSI: displays the current value for the Radio Signal Strength Indicator. This parameter will only display information when the module is registered to an access point module and the value is only updated by either refreshing the web browser screen or configuring the Canopy module to auto- refresh (see Configuration web page.) An acceptable RSSI value for a registered link is greater than 700; however it is important to view this value in conjunction with the Jitter value.
Jitter: displays the current value for the quality of the received signal. This parameter will only display information when the module is registered to an access point module and the value is only updated by either refreshing the web browser screen or configuring the Canopy module to auto- refresh (see Configuration web page.) The value range for Jitter is
Air Delay: display the distance from the subscriber module to the registered access point module. At close range,
Radio Slicing Value: displays information to be used be Canopy technical support.
Radio Transmit Gain Setting: displays information to be used by Canopy technical support.
Site Name: displays information relating to the name of the physical module. This parameter can be set by the operator on the Configuration web page. This information is set into the sysName SNMP
Site Contact: displays contact information for the physical module. This parameter can be set by the operator on the Configuration web page. This information is set into the sysContact SNMP MIB- II object and can be polled via a SNMP management server.
