Motorola Canopy Backhaul Module user manual Specifications, Http, Ftp, Snmp, Des

SPECIFICATIONS

Operating Frequency	U-NII: 5.25 to 5.35 GHz and 5.725 to 5.825 GHz
Range
	ISM: 5.725 to 5.850 GHz
Access Method	Time Division Multiple Access (TDMA)
Signaling Rate	10 Mbps or 20 Mbps
Modulation Type	High Index 2-level or 4-level Frequency Shift Keying (FSK)
	(Optimized for interference rejection)
Carrier to Interference	3dB nominal for 10 Mbps
(C/I)
Receiver Sensitivity	-83 dBm 10-4BER for 10 Mbps, -77 dBm 10-4BER for 20 Mbps
Operating Range	Up to 2 miles (3.6 km) with integrated antenna. Up to 35 miles (56 km)
(All Weather)	with installed passive reflectors.
Transmitter Power	Meets FCC U-NII/ISM and IC LELAN ERP Limit
DC Power measured at	0.34 A @ 24 VDC (8.2 watts) typical
DC converter	0.38 A @ 24 VDC (9.1 watts) max (long cable runs, high ambient
	temperature, high transmit ratio (set by downlink percentage))
Interface	10/100 BaseT, half/full duplex
	Rate auto negotiated (802.3 compliant)
Protocols Used by	IPV4, UDP, TCP, ICMP, Telnet,
Canopy	HTTP, FTP, SNMP, DES
Protocols Supported by	Switched Layer 2 Transport with support for all common Ethernet
Canopy	protocols including IPV6, NetBIOS, DHCP, IPX, etc.
Software Upgrade Path	Remotely downloaded into FLASH via RF link
Network Management	HTTP, TELNET, FTP, SNMP
Temperature	-40°C to +55°C (-40ºF - +131ºF)
Dimensions	11.75” H x 3.4” W x 3.4” D (29.9 cm H x 8.6 cm W x 8.6 cm D)
Weight	1 lb. (.45kg)