Motorola CM360 manual Keypad Edit keypad microphone only, 21English, Method

Keypad Edit (keypad microphone only)

The direct access button from the keypad microphone takes you to the List option only. The last person called from the list is displayed. Note that the last multicall or keypad entry is not shown.

1Press Mic {, }or whichever is programmed as Contact list /keypad entry.

2The last selected list

entry is displayed JOHN

	e.g.
3	Either G or H	PHIL
	until required entry
	e.g..
or	Enter address digits	5234
	directly on
	microphone keypad
	e.g.

Note: If you enter an incorrect address, you must exit the menu (either by selecting the present entry or allowing the menu to time out), then re-enter the contact list via the programmed button on the keypad microphone.

Once the desired name or address is displayed, there are three methods to select the entry :

Method 1

1	Long press on C To confirm selection
2	Display shows:	SELECTED
	(for 2 seconds)
Method 2
1	Press #on the	To confirm selection
	keypad
	(if programmed)
2	Display shows:	SELECTED
	(for 2 seconds)

Method 3

Press the PTT button or Call 1-4 to select address and make the call.

Call1-4 are pre-programmed call buttons.

RADIO CALLS

21English