Motorola CM360 manual 33English, Permanent DTMF Mode, Radio Calls

To initiate a DTMF call with Manually Dialled Telephone Interconnect Call

1Enter the interconnect call from the keypad microphone, you will hear a tone sequence.

Display shows e.g. 122

2 Press dedicated Call Button (PTT or Call 1-4)

Display icon lit: D

3 Wait for call set up and you hear a dial tone.

Display shows: ENTER

4Enter desired phone number, taking care not to press the PTT.

Note: Each DTMF digit is transmitted instantly.

Display shows e.g. 8116

5Once the radio has connected to the called number, you can begin the conversation. Even though this is a phone call, your conversation mimics a radio call, and both parties speak in turn, i.e. press PTT to talk, release to listen.

6To end the call press the Monitor Button or change channel. The clear down call is sent automatically from your radio to shutdown the phone line.

Note: The radio starts a programmable timer the moment both parties stop transmitting (talking). If the time-out timer expires, the radio will end the phone call.

Permanent DTMF Mode

Press the pre-programmed DTMF button once, to put the keypad microphone into permanent DTMF live dial mode. Press the DTMF button again to disable the DTMF live dial. The radio then returns to the IDLE STATE and select calls can be made.

Alternatively, use the DTMF menu option to enable or disable permanent DTMF Mode.

Note: Permanent DTMF mode is not available in scan or during a call.

Using the DTMF Button

1.Press the DTMF button to switch on permanent DTMF Mode when the feature enable alert will sound, the display icon D is lit and the display

will show:

DTMF ON

2.Press the DTMF button again to switch off per- manent DTMF Mode when the feature disable alert will sound, the display icon D is extin-

guished and the display will show:

DTMF OFF

RADIO CALLS

33English