LONE WORKER

The Lone Worker feature enables you to work alone with added safety. You can switch the feature On or Off by using a pre-programmed Lone Worker button, or via the menu.

Using the Lone Worker Button

1.Press the Lone Worker button to switch Lone Worker on, when the feature enable alert will sound and the display will show:

LWKR ON

Using the Menu

1 Ensure radio is in IDLE STATE.

2 Short press on Cto enter menu

3 G or Huntil

UTILS

4 Short press on C to select

5 G or Huntil:

LONE WKR

UTILITIES

If you have not pressed any buttons within a programmed time, you will be reminded that Lone Worker is switched on by a high pitched alert tone (Lone Worker Reminder) being sounded.

Press any button to respond and cancel the alert, if you do not the radio will enter the Emergency state.

2.Press the Lone Worker button again to switch Lone Worker off, when the feature disable alert will sound and the display will show:

LWKR OFF

3.You may also switch off Lone Worker by chang- ing the channel or switching radio off and on again.

6Short press on C to show current status.

7G or H

toggles on/off

8Long press on C to select

9Display shows: (for 2 seconds)

10Radio exits menu mode and display shows e.g.:

ON

OFF

OFF

SELECTED

CHAN 05

45English

Page 47
Image 47
Motorola CM360 manual Using the Lone Worker Button, Lwkr on, Lone WKR, Lwkr OFF