TALKAROUND
In your communications network, you may be using a system to cover a larger area than is possible with your radio. However, you can communicate with another radio within your radio’s range without going through the system by using the Talkaround feature. This is especially useful when the system is down. You can switch Talkaround On or Off by using a pre- programmed Talkaround button or via the menu.
Using the Talkaround Button
1. Press the Talkaround button to switch on |
Talkaround when the feature enable alert will |
Using the Menu
1 Ensure radio is in IDLE STATE.
2 Short press on Cto enter menu
3 G or Huntil
UTILS
4 Short press on C to select
5 G or Huntil:
TALKRND
UTILITIES
sound, the display icon Jis lit and the display |
will show: |
TRND ON
2.Press the Talkaround button again to switch off Talkaround when the feature disable alert will sound, the display icon Jis extinguished
and the display will show:
TRND OFF
6Short press on C to show current status.
7G or H
toggles on/off
8Long press on C to select
9Display shows: (for 2 seconds)
10Radio exits menu mode and display shows e.g.:
ON
OFF
OFF
SELECTED
CHAN 05
