1 2 | O v e r v i e w |
Item | Indicator/Icon Description |
36 | L, C, and R indicated left, center and right front speakers, respectively. LS and |
| RS indicate left and right surround speakers, respectively. LFE (Low Frequency |
| Effect) indicates the subwoofer. |
These icons turn on as follows:
Each icon turns on to indicate a valid input channel. The LFE icon turns on to indicate a LFE component is present.
A box around an icon indicates that the output channel for that speaker has been set.
The
| For more information on speaker settings, see Initial |
| “Operations” section. |
37 | On indicates Night mode enabled. In Night mode, you can set the DCP501 to |
| dim the display illumination and compresses the audio level to lower volume |
| peaks. |
R e a r P an el
Figure 5 illustrates the rear panel of the DCP501:
Figure 5
DCP501 r ear pan el
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 |
|
|
|
| MODEL NO.: DCP 501 |
|
|
| À | NI À L’HUM IDITE”. |
12 | 13 | 14 | 15 | 16 |
Refer to the “Installation” section for instructions on installing and cabling the DCP501.
DCP501 User Guide