I n s t a l l a t i o n | 3 9 |
Connecting Other Audio/Video Sources
You can connect an alternate audio/video source such as another DVD player by following the diagram in Figure 20.
If you wish to use the digital audio output from a DVD player to the DCP501, you must assign either the Optical1 or Coaxial digital audio input to the corresponding DCP501 video input source by using the INPUT SETUP screens. If the DVD player is connected to the VIDEO2 inputs on the front panel, the DCP501 automatically uses the OPTICAL2 digital audio input over the analog input if it is available. See the “Operations” section for information on using the INPUT SETUP screens. Before connecting the DVD player, check the manual supplied with the DVD player for the manufacturer’s installation guidelines.
Figure 20
Connections fo r an altern ate device
DCP501
Alternate
A/V Source
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AUDIO OUT |
|
|
|
|
|
|
|
|
| VIDEO OUT | ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| VIDEO | ||||
COAX OPTICAL | R | L |
|
DIGITALANALOG
Cable(s) you will need:
Audio Video
DCP501 User Guide