Using the MC75 2 - 13
LED IndicatorsThe MC75 has three LED indicators. The Scan/Decode LED indicates status for bar c ode scanning. The
Charging/Battery Status LED indicates battery charging and status. The Radio Status LED indicates WAN radio
status. Table 2-6 describes the LED indications.
Figure 2-9
LED Indicators
Table 2-6
LED Indications
LED State Indication
Scan/Decode LED
Solid Green Successful decode/capture.
Solid Red Laser enabled, scanning/imaging in process.
Off Not enabled.
Charging/Battery Status LED
Slow Blinking Amber Main battery in MC75 is charging.
Solid Amber Main battery in MC75 is fully charged.
Fast Blinking Amber Cha rging error.
Off Not charging.
Single Blink Amber (when Power button pressed) Battery depleted.
Blinking Amber (when Power button pressed) Battery over-temperature condition.
Radio Status LED
Slow Blinking Green WAN radios is on.
Off WAN radio is off.
Radio Status
LED
Scan/Decode
LED Charging/Battery
Status LED
NOTE For information about scanning/decoding, see Data Capture on page 2-33. For information about WAN radio
status and settings, see Chapter 5, Using the Phone, or refer to the MC75 Integrator Guide.