Using the MC75 2 - 37

Figure 2-25
Sample Scan Application with Preview Window
4. Move the MC75 until the red aiming reticle is on the bar code to scan. T he aiming reticle turns green when the
MC75 is able to decode the bar code.
Figure 2-26
Digital Camera Scanning
5. Release the scan button. The Scan/Decode LED lights green and a beep sounds, by defa ult, to indicate the
bar code was decoded successfully.
Using the RS507 Hands-free Imager
An RS507 Hands-free Imager can be used with the MC75 to capture bar code data.
To set up the RS507:
1. Tap Start > Programs > BTScannerCtlPanel icon.
2. If required, select the BT Scanner checkbox and then select the appropriate Com port from the dr op-down list.
3. Tap Save and Exit.
4. Tap Start > Programs > BD Address icon. A bar code displays .
5. Point the RS507 to the bar code. The RS507 reads the bar code and begins pairin g with the MC75.
NOTE OEM version 02.35.000 or higher is required.