7 - 6 MC75 User Guide
MC75 shuts off. MC75 is inactive. The MC75 turns off after a period of inactivity. If the MC75 is
running on battery power, set this period from 1 to 5 minutes, in
one-minute intervals. If the MC75 is running on external power, set
this period to 1, 2, 5, 10, 15, or 30 minutes.
Check the Power window by selecting
Start
>
Settings
>
System
tab
and tapping the
Power
icon. Select the
Advanced
tab and change
the setting for a longer delay before the automatic shutoff feature
activates.
Battery is depleted. Replace the battery.
Battery is not
inserted properly. Insert the battery properly. See
Installing the Main Battery on page
1-6
.
Tapping the window
buttons or icons does
not activate the
corresponding feature.
Screen is not
calibrated correctly. Re-calibrate the screen. See
Calibrating the Screen on page 1-8
.
The system is not
responding. Warm boot the system. See
Resetting the MC75 on page 2-14
.
A message appears
stating that the MC75
memory is full.
Too many files
stored on the MC75. Delete unused memos and records. If necessary, save these
records on the host computer (or use an SD card for additional
memory).
Too many
applications
installed on the
MC75.
Remove user-installed applications on the MC75 to recover
memory. Select
Start
>
Settings
>
System
tab and tap the
Remove
Programs
icon. Select the unused program and tap
Remove.
MC75 keeps powering
down to protect
memory contents.
The MC75’s battery
is low. Recharge the battery.
The internal
Bluetooth radio is
powered on for a
long time.
Because this mode requires battery power, power it off when not
needed.
Table 7-1
Troubleshooting the MC75 (Continued)
Problem Cause Solution