Using Send Picture <Name or #>
Use Voice Recognition to open Picture Mail to the Create Message screen, with the recipient already addressed.
To launch Picture Mail and address a message:
1.Press and release the Smart Key. (Your phone displays the Say a command screen.)
2.Say Send Picture followed by the name stored in Contacts and, optionally, the type of number you want to send it to. For example, say “Send Picture John Smith Work.”
3.Use your keypad to enter the message and then press Send (left softkey).
If you do not specify the type of number and there are multiple numbers for the name, Voice Recognition chooses the mobile number by default.
If you say Send Picture without specifying a recipient or a number, your phone prompts you for this information.
Note: You cannot send Picture Mail to Distribution Lists using Voice Recognition.
See the Experience the Sprint Power Vision Network guide that came with your phone for information about Picture Mail.
Voice Services
Section 2H: Using Your Phone’s Voice Services | 109 |