
USB Interface 8 - 3
6. On first installation when using Windows, the software displays a prompt to select or install the Human
Interface Device driver. To install the Human Interface Device driver provided by Windows, click Next through
all the choices and click Finished on the last choice. The scanner powers up during this installation.
7. To modify any other param eter options, scan the appropriate bar codes in this chapter.
8. Connect an external power supply if desired.
If problems occu r, se e Troubleshooting on page 3-2.
NOTE Interface cables vary depending on configuration . The connectors illustrated in Figure 8-1 are examples
only. The connectors may be different from those illustrated, but the steps to connect the cradle remain
the same.
NOTE Disconnect the power supply before changing host cables or the scanner may not recognize the new host.