12 - 24 Symbol LS3578 Product Reference Guide

Setup Field(s)

Send Data (continued)

Send Next 19 Characters
Send Next 20 Characters
Table 12-1
Setup Field(s) Definitions
Parameter Description Page
Move Cursor
Move Cursor To a Character
Scan the Move Cursor To Character on page 12-25, then any
printable ASCII character from the Alphanumeric Keyboard on page
12-86. When this is used, the cursor moves to the position after the
matching character. If the character is not there, the rule fails and
ADF tries the next rule.
12-25
Move Cursor to Start of Data
Scan this bar code to move cursor to the beginning of the data. 12-25
Move Cursor Past a Character
This parameter moves the cursor past all sequential occurrences of a
selected character. For example, if the selected character is ‘A’, then
the cursor moves past ‘A ’, ‘AA ’, ‘AAA ’, etc. Scan the Move Cursor Past
Character on page 12-25, then select a character from the
Alphanumeric Keyboar d on p age 12-86. If the cha racter is not there,
the cursor does not move (i.e., has no effect).
12-25
Skip Ahead “N” Characters
Scan one of these bar codes to select the number of positions ahead
to move the cursor. 12-26
Skip Back “N” Characters
Scan one of these bar codes to select the number of positions back
to move the cursor. 12-28
Send Preset Value
Send Values 1 throug h 6 by scanning the app ro pr iate bar code.
These values must be set using the prefix/suffix values in Tabl e 7- 4
on page 7-20.
Value 1 = Scan Suffix
Value 2 = Scan Prefix
Values 3-6 are not applicable
12-28