PAGE 6 CHARGING THE BATTERY GETTING STARTED
Charging the Battery
New batteries are shipped partially charged. Before you
can use your phone, install and charge the battery as
described below. Some batteries perform best after
several full charge/discharge cycles.

To charge the battery:

1. Insert the charger into
the USB connector on
your phone as shown.
2. Plug the other end of
the charger into the
appropriate electrical
outlet.
3. When your phone
indicates
Charge
Complete
, remove
the charger.
Tip: You can safely leave the charger connected to your
phone after charging is complete. This will

not

damage
the battery.
Note: When you charge the battery, the battery level
indicator in the upper right corner of the display shows
how much of the charging process is complete. At least
1 segment of the battery level indicator must be visible
to ensure full phone functionality while charging.
Turning Your Phone On
1. Open your phone.
2. Press and hold the power
key for 3 seconds.
3. If necessary, enter
your 4-digit unlock code
(the last 4 digits of your
phone number) and press
the right soft key to unlock the phone.
Making a Call
1. Press keypad keys to dial the phone number.
2. Press
N
to make the call.
3. Press
P
to end the call and “hang up” the phone
when you are finished.
-or
-
4. Close the flip.
Tip: You can set the phone to answer calls when you
open the flip.
To activate, press
Menu
>
Settings
>
In-Call Setup
>
Answer Options
>
Open To Answer
Answering a Call
When you receive a call, your phone rings and/or
vibrates and displays an incoming call message.
• Press the answer key to answer a call.
-or-
• Press
N
-or-
• Open the flip to answer the phone.
GETTING STARTED