
Parameter Menus 10 - 51
Set Lengths for Code 93The length of a code refers to the number of characters (i.e., human readable characters), including check
digit(s) the code contains. Select length s f o r C o de 93 for any length, one or two discrete lengths, or lengths within
a specific range.
One Discrete Length - Select this option to decode only codes containing a selected length. Select lengths using
the Numeric Bar Codes on page 10-93. For example, select Code 93 One Discrete Length, then scan 1, 4, to limit
decoding to only Code 93 symbols containing 14 characters. To change the selection or cancel an incorrect entry,
scan the Cancel bar code on page 10-95.
Code 93 - One Discrete Length
Two Discrete Lengths - Select this option to decode only codes containing two selected lengths. Select lengths
using the Numeric Bar Codes on page 10-93. For example, select Code 9 3 Two Disc rete Lengths, then scan 0,
2, 1, 4, to limit the decoding to only Cod e 93 sy mbols c ontainin g 2 or 1 4 chara cters. To change the selection or
cancel an incorrect entry, scan the Cancel bar code on page 10-95.
Code 93 - Two Discrete Lengths
Length Within Range - Select this option to decode only those codes within a spec ified r ange. Select lengths
using the Numeric Bar Codes on page 10-93. For example, to decode Code 93 symbols containing between 4
and 12 characters, first scan Code 93 Length Within Range, then scan 0, 4, 1 and 2 (single digit numbers must
always be preceded by a leading zero). To change the selection or cancel an incorrect entry, scan the Cancel bar
code on page 10-95.
*Code 93 - Length Within Range
Any Length - Scan this option to decode Code 93 symbols containing any number of characters.
Code 93 - Any Length