
Parameter Menus 10 - 57
Set Lengths for Interleaved 2 of 5The length of a code refers to the number of characters (i.e., human readable characters) the code contains, and
includes check digits. Set lengths for I 2 of 5 to any length, one or two discrete lengths, or lengths within a specific
range.
One Discrete Length - Select this option to decode only codes containing a selected length. Select lengths using
the Numeric Bar Codes on page 10-93. For example, select I 2 of 5 One Discrete Length, then scan 1, 4, to
decode only I 2 of 5 symbols containing 14 characters. To change the selection or cancel an incorrect entry, scan
the Cancel bar code on page 10-95.
*I 2 of 5 - One Discrete Length
Two Discrete Lengths - Select this option to decode only codes containing two selected lengths. Select lengths
using the Numeric Bar Codes on page 10-93. For example, select I 2 of 5 Two Discrete Lengths, then scan 0, 2,
1, 4, to decode only I 2 of 5 symbols containing 2 or 14 characters. To change the selection or cancel an incorrect
entry, scan the Cancel bar code on page 10-95.
I 2 of 5 - Two Discrete Lengths
Length Within Range - Select this option to decode only codes within a specified range. Select lengths using the
Numeric Bar Codes on page 10-93. For example, to decode I 2 of 5 symbols containing between 4 and 12
characters, first scan I 2 of 5 Length Within Range, then scan 0, 4, 1 and 2 (single digit numbers must always be
preceded by a leading zero). To change the selection or cancel an incorrect entry, scan the Cancel bar code on
page 10-95.
I 2 of 5 - Length Within Range
Any Length - Scan this option to decode I 2 of 5 symbols containing any number of characters.
I 2 of 5 - Any Length
NOTE Selecting this option can lead to misdecodes for I 2 of 5 codes.