Parameter Menus 10 - 53

Set Lengths for Code 11
The length of a code refers to the number of characters (i.e., human readable characters), including check
digit(s) the code contains. Set lengths for Code 11 to any length, one or two discrete lengths, or lengths within a
specific range.
One Discrete Length - Select this option to decode only codes containing a selected length. Select lengths using
the Numeric Bar Codes on page 10-93. For example, select Code 11 One Discrete Le ngth, then scan 1, 4, to limit
the decoding to only Code 11 symbols containing 14 characters. To change the selection or cancel an incorrect
entry, scan the Cancel bar code on page 10-95.
Code 11 - One Discrete Length
Two Discrete Lengths - Select this option to decode only codes containing two selected lengths. Select lengths
using the Numeric Bar Codes on page 10-93. For example, select Code 11 T w o Dis crete Lengths, then scan 0,
2, 1, 4, to limit the decoding to only Code 11 symbols containing 2 or 14 characters. To change the selection or
cancel an incorrect entry, scan the Cancel bar code on page 10-95.
Code 11 - Two Discrete Lengths
Length Within Range - Select this option to decode only codes within a spec ified r ange. Select lengths using
the Numeric Bar Codes on page 10-93. For example, to decode Code 11 symbols containing between 4 and 12
characters, first scan Code 11 Length Within Range, then scan 0, 4, 1 and 2 (single digit numbers must always
be preceded by a leading zero). To change the selection or cancel an incorrect entry, scan the Cancel bar code on
page 10-95.
*Code 11 - Length Within Range
Any Length - Scan this option to decode Code 11 symbols containing any number of characters.
Code 11 - Any Length