System Administration
System Administration
This User Guide covers the commands relevant to the T3 PowerBroadband Switch. For a complete set of commands and information, consult the T3 PowerBroadband Command Reference.
Management Access
T3 can be managed via serial console, telnet, HTTP webUI, or SNMP. Eth1 is enabled by default. Telnet and HTTP are accessible at the default IP address.
Access Methods
Default IP address
Serial console
Telnet
HTTP
192.168.1.3
Terminal settings:
Uses TCP port 23 |
|
Browser support: | IE6 or greater, Mozilla based browser |
Management URL: | http://<IP address> |
IP Port: | 80 |
Default login and password
Default user name for administrative access: | admin |
Default password: | <blank> |
Default user name for monitoring only: | user |
Default password: | <blank> |
CLI Configuration Script files
T3 file system stores and load configuration script files. These files are text editable. Use the following commands to complete these management tasks:
1.Create a starting configuration file from an existing T3 switch
2.Copy the file to an external server
3.Edit the file on a PC
4.Load the file into another T3 switch
5.Execute the file as a set of configuration commands
The command syntax to use the file system is:
file copy <string(source)> to <string(destination)>
a.Source can be a local file, a remote FTP or TFTP file, or a
b.Destination can be a local file or a remote FTP or TFTP file. Note that the combination of the Source keywords and the remote Destination allows you to copy the running config directly to a remote server. For example; file copy running to
c.At least one (source or destination) must be the local file system. If the source and destination are remote servers, the command will fail.
Motorola, Inc. | Page 19 of 50 | |
|
|
|
